CP-8821-K9-BUN

CP-8821-K9-Bun Specifications

Protocols

IEEE 802.11a, 802.11b, 802.11g, 802.11n, 802.11ac

Frequency bands and operating channels

2.412 to 2.472 GHz (channels 1 to 13)

5.180 to 5.240 GHz (channels 36 to 48)

5.260 to 5.320 GHz (channels 52 to 64)

5.500 to 5.700 GHz (channels 100 to 140)

5.745 to 5.825 GHz (channels 149 to 165)

IEEE 802.11d is used to identify available channels

Nonoverlapping channels

2.4 GHz (20-MHz channels): up to 3 channels

5 GHz (20-MHz channels): up to 24 channels

5 GHz (40-MHz channels): up to 9 channels

5 GHz (80-MHz channels): up to 4 channels

Operating modes

Auto (preference to 5 GHz)

2.4 GHz only

5 GHz only

Display

2.4-in. (6-cm) color display with 240 x 320 pixel resolution

Dimensions (HxWxD)

5.2 x 2.2 x 0.7 in. (13.2 x 5.6 x 1.7 cm)

Weight

Device 4.4 oz (126 g), battery 1.3 oz (37 g), total = 5.7 oz (163 g)

Battery

Up to 13 hours of voice calling; up to 220 hours standby

Rechargeable Lithium-ion 4.35V, 2060mAh smart battery

Note: Actual battery life varies significantly based on environmental factors, scan mode, and Bluetooth use.

Input power

Phone: 100 to 240 VAC, ~0.2A, and 50 to 60 Hz

AC adapters (by geographical region)

Operating temperature

Device: 14° to 122°F (-10° to 50°C)

Battery: -4° to 140°F (-20° to 60°C)

Storage temperature

Device: -22° to 140°F (-30° to 60°C)

Battery: -4° to 113°F (-20° to 45°C)

Relative humidity

10% to 95% (noncondensing)

Vibration

1.5 Grms maximum, 0.1 in. (2.5 mm) double amplitude at 0.887 octaves per minute from 5-500-5 Hz sweep, and 10-minute dwell on three major peaks in each of the three major mutually perpendicular axes

Thermal shock

-22°F (-30°C) 24 hours; 158°F (70°C) 24 hours

Altitude

Certified for operation: 0 to 6500 ft (0 to 2 km)

Endurance

Ingress Protection Standard IP67

MIL-STD-810G Drop and Vibration procedures

Drop specs

Withstand multiple drops of 6 feet (1.8 m) onto concrete. 12 drops (6 faces, 4 edges, face, and bottom)

Headset

Wireless: Bluetooth SW 3.0 HW 4.0

Wired: 3.5 mm stereo headphone/microphone jack

Connector

Magnetic USB 2.0 On the Go (OTG) connector

Safety

UL 60950-1

CAN/CSA 60950-1

EN 60950-1

IEC 60950-1

AS/NZS 60950.1

IEC 60529 (IP 67)

Electromagnetic compatibility and electromagnetic interference (EMC/EMI)

47 CFR Part 15 Class B

ICES-003 Class B

EN 55022 Class B

AS/NZS CISPR 22 Class B

CISPR 22 Class B

VCCI Class B

EN 61000-3-2

EN 61000-3-3

KN 22 Class B

EN 55024

EN 50082-1

EN 61000-6-1

EN61000-6-3

EN 300386

EN 60601-1-2

KN Immunity Series

Telecom

FCC Part 68 (CFR) (HAC)

NZ PTC 220 DR

AS/ACIF S004 and AS/ACIF S040 (Australia)

TIA 810-B and TIA 920-A

Canada-CS-03-HAC

Radio

USA: FCC Part 15.247 (2.4 GHz), FCC Part 15.407 (5 GHz), and FCC Part 2

Canada: RSS-210

Japan: ARIB STD-T66 (2.4 GHz), ARIB STD-T70, and T71 (4.9/5 GHz)

ETSI: EN 300.328 (2.4 GHz) and EN 301.893 (5 GHz)

Australia and New Zealand: AS/NZS 4268

Singapore: IDA TS SRD

Hong Kong: HKTA1039

RF Exposure

OET-65C (01-01)

ANSI C95.1 (91)

RSS-102

ACA Radio Communications (Electromagnetic Radiation – Human Exposure) Standard 2003

EN 50360

EN 301489-1

EN 301489-17